Myday Machinery Inc.
 

 

MYDAY MACHINERY INC. No.112-53, Cingguang Rd., Wurih Dist., Taichung City 41462, Taiwan.
Tel:886-4-2335-1313 #23
Fax:886-4-2335-2259
E-mail: mydayche@ms61.hinet.net
Picture of Agent_Wanted

CNC 4 Guide-way Giant Lathe

Home > Products > CNC Flat Bed Lathe > CNC 4 Guide-way Giant Lathe

 
Image of CNC 4 Guide way Giant Lathe

CNC 4 Guide way Giant Lathe

4 Guide-way CNC Giant Lathe is a special type of flat bed lathe. It has one wide bed and 2 pairs of guide ways. Its tailstock and steady rests are placed on the pair of guide ways at the rear side. Thus, we would build the carriage across the 4 guide ways (called full length cross slide) as standard model; this model could stand for very heavy duty machining and has full cross slide travel.
Besides, we could build its carriage on one pair of guide way at the front side (called half length cross slide). In this option, the carriage wouldn’t interfere with steady rests and its tailstock; it’s very good at outer diameter machining at one time without removing steady rests.


CNC Giant Heavy Duty Lathe : 52" bed Specifications
Description \ Model TNC-1800 TNC-2000 TNC-2250 TNC-2500 TNC-2700
Swing over bed 1800 mm 2000 mm 2250mm 2500mm 2700 mm
Swing over cross-slide: Full length (Opt.1) 1240 mm 1440 mm 1690 mm 1940 mm 2190 mm
Swing over cross-slide: Half length (Opt.2) 1325 mm 1510 mm 1745 mm 1985 mm 2225 mm
Center height 900 mm 1000 mm 1125 mm 1250 mm 1375 mm
Bed width 1345mm (52.9”)
Distance between centers 3000 mm (120”) ~ 12000 mm (480”)
Travel of Full Length cross-slide X-axis: 1250mm, Z-axis: 2600~11600mm
Travel of Half Length cross-slide X-axis: 720mm, Z-axis: 3000~12000mm
Spindle bore / Spindle nose Ø210mm / A2-15 or A2-20
pindle speeds (4 Steps) 5 ~ 460 rpm
Spindle motor FANUC 45KW or FAGOR 51KW or 75KW with inverter
Number of tool stations Horizontal 4 Vertical 8
OD Tool shank cross section  50 mm × 50 mm 32 mm × 32 mm
ID Tool shank diameter   Ø60, Ø63 (opt.)
Cutting feed rate (per rotation) X-axis: 0.001-250 mm , Z-axis: 0.001-400 mm
Rapid travel X-axis: 5 m / min , Z-axis: 5 m / min
Tailstock spindle travel / Quill 300 mm / Ø290 mm (Rotary Quill)
Tailstock spindle taper  MT#7
Controller  FANUC 0i-TD  FAGOR 8055i
X-axis servo motor αiF 22 (4.0 KW) FKM 66 (4.9 KW)
Z-axis servo motor αiF 30 (7.0 KW) FKM 82 (6.7 KW)
X-axis transmission Ball Screw Ø50mm with 1:2 gear set
Z-axis transmission Ball Screw Ø80mm (BC 3~4M), Ø100mm (BC 5~6M),
Rack and Dual Pinions (BC 7~12M)
Coolant pump motor  1.0KW
Machine Weight
(3 meter BC)
30500 kgs 31500 kgs 33000 kgs 34500 kgs 37000 kgs
Weight per extra meter 4000kgs
※ Full Length or Half Length Cross Slide design depends on customers’ choice.

52"STANDARD ACCESSORIES: 52"OPTIONAL ACCESSORIES:
CNC controller: FANUC 0i-TD or FAGOR 8055i 4-jaw chuck
AC Spindle Motor Face plate
Spindle oil cooler Steady rest
Auto lubrication system Locating Hydraulically
Coolant system Boring device
H4 or V8 hydraulic turret Hydraulic Tailstock
Work light C-axis Control C
Chuck guard and Turret guard, Control Panel moving along with Carriage Power Turret
Rear Splash Guard and chip conveyor (DBC≦8 meter)
Adapter sleeve and Tool centers
Tailstock rotary quill  
Leveling bolts & Pads  
Tool box with oiler, spare fuse, paint & tools  
Operation & Service manual  
Specifications are subject to change without notice for further design improvement.

Copyright © Myday Machinery Inc. Hosted by Machinetools Directory, Plastic and Rubber Machine Directory. Sitemap